 |
|
This page lists the available types of the chosen material |
|
|
| |
|
|
|
<< Back |
| PA, polyamide (Nylon) |
View Material Data |
|
|
| Polyamides have a good balance of price, processability, machinability and material properties; high stiffness at elevated temperatures, high impact strength at low temperatures, good wear characteristics and low friction. They withstand many common aliphatic and aromatic hydrocarbons, lubricants and oils. Some acids, phenols and halogenated hydrocarbons, and strong bases and oxidants such as peroxides attack the materials. They are sensitive to hydrolysis and thermo-oxidative degradation. They are also strongly hygroscopic, which negatively affects dimensional stability. |
 |
|
|
| PA-6: |
| standard extruded PA-6 (Ertalon SA). |
| sheet, natural | |
| rod, natural | |
| heavy-wall tube, natural | |
| rod, black | |
|
| View Material Data |
| PA-6 GF30, with 30% glass fibre: |
| 30% glass fibre reinforced extruded PA-6. |
| rod, black | |
|
| |
| PA-6 cast: |
| Cast PA-6 (Ertalon PLA). |
| rod, natural | |
| sheet, natural | |
| rod, black | |
| sheet, black | |
| heavy-wall tube, red, RAL 3018 | |
|
| View Material Data |
| PA-6 G XAU, heat stabilised: |
| Heat stabilised cast PA-6 with enhanced crystallinity. Ertalon 6 XAU. |
| rod, black | |
| sheet, black | |
| heavy-wall tube, black | |
|
| View Material Data |
| PA-6 G NSM, with solid lubricant: |
| A cast PA-6 with solid lubricant, suited for parts moving at high velocity. Nylatron NSM. |
| sheet, grey | |
|
| View Material Data |
| PA-6 G LFX, oil lubricated: |
| Oil lubricated cast PA-6 for high load, low velocity applications. Ertalon LFX. |
| sheet, green | |
| rod, green | |
|
| View Material Data |
| PA-6 G GSM, lubricated with MoS2: |
| Cast PA-6 with solid MoS2 lubricant. Molybdenum disulphide enhances crystallisation in the material, improving sliding and wear properties. (Nylatron GSM) |
| rod, black | |
| sheet, black | |
|
| View Material Data |
| PA-6 G ST901, impact modified: |
| Extra tough, impact modified cast PA-6. (Nylatron MC 901). |
| rod, blue | |
| sheet, blue | |
|
| View Material Data |
| PA-6 G SD, antistatic: |
| Cast PA-6, static dissipative grade Polypenco MC501CDR6 |
| sheet, black | |
|
| View Material Data |
| PA-6.6: |
| standard extruded PA-6.6 (Ertalon 66) |
| sheet, natural | |
| rod, natural | |
| rod, black | |
|
| View Material Data |
| PA-6.6 MoS2 : |
| An extruded PA-6.6 with solid MoS2 lubricant. Molybdenum disulphide enhances crystallisation in the material, improving sliding and wear properties. Nylatron GS. |
| rod, black/antracite | |
| sheet, black/antracite | |
|
| View Material Data |
| PA-6.6 GF30, with 30% glass fibre: |
| Polyamide-6.6 with 30% glass fiber reinforcement (Ertalon 66-GF30). |
| rod, black | |
| sheet, black | |
|
| View Material Data |
| PA-6.6 CF20, with 20% carbon fibre: |
| polyamide-6.6 with 20% carbon fibre reinforcement |
| rod, black | |
| sheet, black | |
|
| View Material Data |
| PA-12: |
| polyamide-12 is mechanically weaker than the other polyamides, but absorbs less water. |
| rod, natural | |
| sheet, natural | |
|
| View Material Data |
| PA-4.6: |
| Polyamide-4.6 has the highest stiffness and use temperature of unfilled polyamides. |
| sheet, rust brown | |
| rod, rust brown | |
|
| View Material Data |
| PA-6.3: |
| PA-6.3 (polyphtalic amide PPA) is amorphous and transparent, and absorbs less water than other polyamides. They have high use temperatures, impact strength and chemical resilience. |
| rod, transparent, slightly yellowish | |
| sheet, transparent, slightly yellowish | |
|
| View Material Data |
|
|
|
|
|